Aircrack-Ng Wi-Fi Hacking Tools

              Aircrack-Ng Wi-Fi Hacking Tools

Introduction

 This tutorial is focused on linux. Yes, I realize that linux is a problem for many people. Unfortunately Microsoft Windows simply does a poor job supporting the aircrack-ng suite.

 This is primarily due to the proprietary nature of the operating system and wireless card drivers.

The basic process consists of three steps:

     Determine the chipset in your wireless card
     Determine which of the three options you will use to run the aircrack-ng suite
     Get started using the aircrack-ng suite.


Determine the chipset in your wireless card
     wireless card basically is the chipset of wifi installed in your system there are many brand of wifi chipsets like alfa, broadcom, aethoros etc you can check your device information of wifi by going to control panel in windows pc in network and sharing centre then change adapter setting the best is alfa and aethros broadcom will not work in most cases if you broadcom then you have buy a wireless card that support monitor mode like (tp-link) it is capable of injection and can hack wifi easily.....

This tutorial is for hacking wifi for linux if you dont know how to use linux like kali linux or backtrack you can check the page how to hack wifi using windows click here to get it..


steps to hack wifi in linux:-

1. open the terminal and type airmon-ng
                                             

 It will display the chipset name like wlan0
 Then type airmon-ng start wlan0
It will enabe monitor mode on mon0 or mon1
Airmon-ng responds with some key information on our wireless adapter including the chipset and driver. Most importantly, note that it has changed the designation for our wireless adapter from wlan1 to mon0...

2. now we are in monitor mode then type airodump-ng mon0
                                           

it will scan and display all the network around you...
then press control c in your keyboard to stop the scan then choose the network you want to hack copy the BSSID (network address its under bssid given in terminal) channel its also displayed in terminal just copy its under ch 1 or any number 4,8,9 etc ....

3. then type the following command if you copied the data explained above then type in terminal
    airodump-ng --bssid (network address you copied) -c (channel ) -w (give a name you want or wifi name you are hacking) mon0 (your interface)
It will look like airodump-ng --bssid 00:XX:XX:XX:XX -c 5 -w www.cybertwist.blogspot.com mon0
then click enter....

4. open a new terminal but dont close old terminal which we are working open new terminal and type aireplay-ng...
                                            

5. Then type aireplay-ng -0 (deauthenticate request) 3 (number of times to deauthenticate) -a ( the bssid you copied earlier ) and mon0 (intertface)

          aireplay-ng -0 3 -a 00:XX:XX:XX:XX mon0

6. you will get handshake if you are lucky in old terminal of airodump-ng it will be displayed in top right side of terminal...

7. close all terminal

8. go to home folder or root folder in backtrack or kali you will find a file what you added earlier (-w)
    www.cybertwist.blogspot.com.pcap

9. open a terminal type aircrack-ng and drag the pcap file in terminal if its wep network then it will crack without dictionary if its wpa you have to provide a dictionary file to crack...

                                                     

10. its done it will display the password if its successfully hacked....

note:-for any blackhat activity the page is not liable this is only for educational purpose...


If you have a broadcom adapter or any other adapter which are not working you can buy adapter below to use for hacking this adapter supports monitor mode and works on both windows and linux you dont have to install additional software for it just plug and play hope you enjoyed....

note: this is for educational purpose for any blackhat activity the page is not liable...

  Wireless Adapter for linux and windows

                               

Hack wifi using windows

Hii everyone and welcome to cybertwist....

We are here with lots of cool stuff and tricks which can be usefull to simply your workwhich can be used in your daily routine all the tricks has been tested just get updated yourself whats happening in the world with the new release in the technology softwares etc...

How To Hack Wifi WPA WPA2 WPS In Windows In 2 Mins Using And Dumpper

 

                                          

 

Today I am going to share a wonderful hack on Wifi, using this we can hack a wifi WPA/WPA2 – WPS within seconds, the easiest and best way to Hack wpa networks. 

What is WPA/WPA2 :

Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) are two security protocols and security certification programs developed by the Wi-Fi Alliance to secure wireless computer networks. The Alliance defined these in response to serious weaknesses researchers had found in the previous system, WEP (Wired Equivalent Privacy).

WPA (sometimes referred to as the draft IEEE 802.11i standard) became available in 2003. The Wi-Fi Alliance intended it as an intermediate measure in anticipation of the availability of the more secure and complex WPA2. WPA2 became available in 2004 and is a common shorthand for the full IEEE 802.11i (or IEEE 802.11i-2004) standard.

A flaw in a feature added to Wi-Fi, called Wi-Fi Protected Setup, allows WPA and WPA2 security to be bypassed and effectively broken in many situations. WPA and WPA2 security implemented without using the Wi-Fi Protected Setup feature are unaffected by the security vulnerability.

WPA2 has replaced WPA. WPA2, which requires testing and certification by the Wi-Fi Alliance, implements the mandatory elements of IEEE 802.11i. In particular, it includes mandatory support for CCMP, an AES-based encryption mode with strong security. Certification began in September, 2004; from March 13, 2006, WPA2 certification is mandatory for all new devices to bear the Wi-Fi trademark.

 What Is WPS :

Wi-Fi Protected Setup (WPS; originally Wi-Fi Simple Config) is a network security standard that attempts to allow users to easily secure awireless home network but could fall to brute-force attacks if one or more of the network's access points do not guard against the attack.

Requirements: 

 1)     Laptop or USB wifi Adapter 

 2)     Windows Operating System

 3)     Dumpper

 

Download and Install all the Above Given Software’s one by one, even If a single software is missing out hack cannot be successful, be careful in downloading and installing these software’s.

Now Here I Start Our Tutorial on Hacking Wifi WPA/WAP2 – WPS Networks  In Windows Using JumpStart And Dumpper

Tutorial To Hack Wifi WPA/WPA 2

  1)     After Downloading and Installing all the Software’s Open Dumper (No need of      Installing  Dumper, whenever you want to hack open it )

  2)      Select your Network Adapter Now Click on “Scan”, There you can see all the available Wifi Networks

  3)     Now Move on to the “WPS” Tab

  4)     Select “All Networks”

  5)     Now Click on “Scan”

 6)     Select a Network That You Want Hack

 7)     Now The Hack is Completed, You are already connected to the network that you Hacked

 8)Click on “Profiles” to see the Details and Passwords of the wifi Networks That You Hacked

 9)Select  a Network and There you can find  the details and passwords of the networks that you hacked 

This is the Simplest Method ever that too in windows, till now I did not post wifi hacking through windows, this is my very first post on Wifi Hacking through Windows, all my other Wifi Hacking articles are hacking through Kali Linux

Here is the link to Check all my Wifi Hacking Methods In Kali Linux

Normally some of the wifi networks cannot be hacked through this method, this method has many limitations. So I want to show you all a very Perfect Easy way of hacking Wifi WPA/WPA2 – WPS (Locked And Unlocked). My Next Article Is on Hacking Wifi WPA/WPA2 – WPS (Locked And Unlocked) So Don’t Miss It....

To download the latest wifi hacker click the link below...

To download dumper just complete one offer...

download the app to get link to download dumper ...

download and regester on the app to get link to download dumper....

link OFFER

After completing the offer come back to the page enter your email address send it or comment below to get your copy of software....

NOTE :- this is for only educational purpose the page is not liable for any black hat activity...

Enjoy keep hacking.....